inverter panel
PANEL/REMOTE SETTING VALUE 1. OFF:To select frequency command (b1-01) and operation command (b1-02). ON : Set frequency command/operation command by digital operator . To switch the input method between frequency…
winner inverter acceleration time setting
Win- va /vc,s deceleration / acceleration time has 4 options , to switch between these time option , please set deceleration / acceleration time option 1 ,2 at multi function…
danfoss inverter
When terminal 14 is used as frequency command please h3-09 (frequency command (current ) terminal 14 function selection ) to be if otherwise if you use this function fault (o…
WINNER INVERTER,S UP / DOWN COMMAND SETTING 10, 11.
It is the function to control the inverter,s output frequency through the control terminal,s on/off . when using this function please make sure to set the 2 multi function input…
winner inverter fault setting
In the occasion where up/down was set multi step peed command 1~8 will be all non effective . the dwell output frequency when up/down is on will be memorized by…
winner pid control and operate motor
TO CANCEL PID CONTROL off = pid control is enabled . on = pid control is disabled ( normal control of inverter ) with this setting ,the multi – function…
440 volt inverter fault setting
EXTERIOR FAULT ,(SETTING,20-2 F) This is to set how to output the warning to exterior when the exterior equipment is at fault or in a abnormal status and the inverter…
winner dc braking command
Maximum output frequency / exterior search command 1 (setting , 61 ). off = normal action . on = start speed search from maximum output frequency . Setting frequency /…
winner inverter constant function
h2-01,multi function input (terminal 9-10 ) is multi function contact output terminal 9-10,s function selection (contact ). h2-02,multi function input (terminal 25-27) is the function selection of multi function output…
winner inverter settings
BASE TERMINAL 13 . The input is the frequency at 0,v , it is set in unit of % with max . output frequency taken as 100% please referee to…