440 volt inverter slip compensation gain
SLIP COMPENSATION GAIN. this function is used to improve speed accuracy when operating with a load .setting range is 0.0~2.5 and factory setting is 1.0 . NOTE: this constant …
Read MoreTag: how to make inverter
440 volt inverter voltage limit
OUTPUT VOLTAGE LIMITED OPERATION SELECTION. OUTPUT VOLTAGE LIMIT OPTIONS, 0: DISABLED. 1:EFFECTIVE THE MOTORS FLUX FALLS AUTOMATICALLY WHEN THE OUTPUT VOLTAGES REACHES SATURATION STATUS. NOTE: OUTPUT VOLTAGE LIMIT ACTION …
Read Moreelectric inverter torque constant
START TORQUE CONSTANT. the setting of start torque rising time is in unit of Mr s (note )filter delay is disabled when the setting is between 0~4 ms NOTE: when …
Read Moreelectric inverter carrier frequency
CARRIER FREQUENCY set the carrier frequency upper limit and lower limit in K Hz units . the carrier frequency gain is set as follows . frequency is fixed at …
Read Moreelectric inverter afr gain and frequency
AFR GAIN. 0: carrier frequency is 2 k Hz . 1:carrier frequency is the setting of c 6-0 1. 2: carrier frequency is 5 k Hz (the carrier frequency of …
Read Moreelectric inverter frequency
JOG FREQUENCY REFERENCE. the frequency reference when the multi function inputs jog frequency reference selection f jog command and r jog command are on. NOTE: the frequency reference default value …
Read Moreelectric inverte,s torque reference
TORQUE REFERENCE DELAY TIME . the primary delay time constant of torque command filter is set in unit of m r s NOTE: to adjust the time constant …
Read Morefrequency speed and voltage of inverter
set only to fine adjust v/f for the output range when using flux vector control .normally this setting range and factory setting will be cut by 50% for …
Read Moremotor system in inverter
MOTOR 2 LINE TO LINE RESISTANCE . To set the motor,s line to line resistance in unit of ohm . note: the factory setting depends on the capacity of the …
Read Moreinverter dc to ac
inverter dc to ac INVERTER,S SETTING VALUE FUNCTION,S Setting value.== function . 15 = emergency stop (a connector : decelerate to stop according to c1-09 when it is …
Read More