winner frequency selection

 

Terminal
s/n
Content
Specification
Ta 1
1
Power supply for  encoder
Dc + 12v (+-5)max .20ma
2
Dc o v ( grounding terminal for power supply)
3
A phase pulse input terminal
H : +8v ~12v
L:>+ 1v
(max, response  frequency 30 Hz)
4
A phase pulse input terminal
5
B phase input terminal H:8v -12v
H :+ 8v  ~ 12v
L :> + 1v
(max . response frequency 30 Hz )
6
B phase pulse input common terminal
Ta 2
1
A phase pulse monitoring output terminal
Open – circuit collector output . DC 24v max 30ma
2
A phase pulse monitoring input common terminal
3
B phase pulse monitoring output terminal
Open circuit collector output . DC24v max 30ma
4
A phase pulse monitoring input common terminal
Ta 3
(E)
Shielding cable connection terminal

 



Win – va/vb can use 8 frequency command and 1 jog frequency command . hence the maximum number of speed steps is 9 .
To switch between these frequency command  please set the multi function input to be multi step speed command 1-3 and jog frequency selection .

 

Terminal
No
Setting value
Description
            5
    H1-03
     3
Multi-speed command 1(when setting the auxiliary frequency command in h3-05 , it is also used for the switch between main speed/auxiliary speed)
            6
     H1-04
     4
Multi speed command2
            7
     H1-05
     5
Multi speed command3
            8
     H1-06
     6
Jog frequency selection (prior to multi- speed command )

 

as shown in below table frequency is selected according to the on/off of multi step speed command 1~3 and jog frequency selection .

Leave a Reply

Your email address will not be published. Required fields are marked *