compensation
this becomes the gain to compensate for slip caused by motor temperature variation when motor,the temperature rise by converting it into slip compensation of inverter. […]
440 volt inverter voltage limit
inverter setting values. 440 volt inverter OUTPUT VOLTAGE LIMIT OPTIONS OF 440 VOLT INVERTER. 0: DISABLED. 1:EFFECTIVE THE MOTORS FLUX FALLS AUTOMATICALLY WHEN THE OUTPUT […]
torque converter
TORQUE CONVERTER / INVERTER. torque converter is use for control starting load when this function is used the start torque converter compensation is set by […]
electric inverter carrier frequency
CARRIER FREQUENCY set the carrier frequency upper limit and lower limit in K Hz units . the carrier frequency gain is set as follows […]
electric inverter afr gain and frequency
ELECTRIC INVERTER electric inverter carrier frequency is 2 k Hz . 1:carrier frequency is the setting of c 6-0 1. 2: carrier frequency is […]
electric inverter frequency
ELECTRIC INVERTER FREQUENCY REFERENCE. electric inverter frequency reference when the multi function inputs jog frequency reference selection f jog command and r jog command are […]
electric inverter torque reference
TORQUE REFERENCE DELAY TIME . the primary delay time constant of torque command filter is set in unit of m r s to adjust […]
frequency speed and voltage of inverter
set only to fine adjust v/f for the output range when using flux vector control of frequency speed and voltage of inverter .normally this setting […]
motor system
motor system in inverter MOTOR 2 LINE TO LINE RESISTANCE . To set the motor,s line to line resistance in unit of ohm . note: […]
WINNER,S OPERATION SELECTION AT OVER SPEED
OPERATION SELECTION AT OVER SPEED/ DEVIATION . To set the stop method when over speed occurs.0:deceleration to stop using deceleration time 1 (c 1-0 2). […]