inverter,s speed protection
forward torque limit set the torque limit values as a percentage of the motor rated torque.four indevidual regions can be set. reverse torque limit note:
inverter frequency
monitor selection after power up when the inverter is started please set the item need to display 1: frequency command 2: frequency command. 3: output
3 phase inverter selaction
user constant initial value this constant is used to record or clear the user constant defaults . 0: no change .(keep current setting.) 1: record
inverter display
exception analysis when the inverter is at fault, the operator will have the exception display and output the action of fault contact. at the same
inverter,s display system.
inverter,s display system. display va:oc,vc:sc. load short circuit ,inverter,s output and load has be short circuited.grounding and short circuit occurs(cuased by that the motor is
inverter variable frequency
VFD INVERTER A Variable Frequency Drive two is a kind of motor controller that drives an electric powered motor by way of varying the
Power Inverter Installation.
Power Inverter Installation. Abstract. how to power inverter installation In this article, we will consider how to make your application and choose the appropriate power
440 volt inverter
Moniter selection after power up when the inverter is started, please set the item need to displey 1:frequency command 2:frequency command. 3:output current
POWER INVERTER KVA SELECTION.
POWER INVERTER KVA SELECTION. donot change this constant setting note : the setting range and factory setting depend on the inverter capacity frequency reference
OUTPUT REACTOR OF INVERTER
THE SELECTION OF OUTPUT REACTOR OF INVERTER When the output reactor of inverter cable is long the current change of the module will lead to