ENERGY SAVING
San Miguel de Cozumel ENERGY SAVING this is the frequency lower limit within the effective range of energy saving control . it is set in unit of Hz
inverters
buy cenforce 200 mg INVERTERS ACCELERATION/DECELERATION TIME SETTING UNIT. the acceleration time when multi function input emergency stop is on.0:unit:0.01 second 1:unit:0.1 second.note:to set more precisely the acceleration time,please
compensation
this becomes the gain to compensate for slip caused by motor temperature variation when motor,the temperature rise by converting it into slip compensation of inverter.
440 volt inverter voltage limit
inverter setting values. 440 volt inverter OUTPUT VOLTAGE LIMIT OPTIONS OF 440 VOLT INVERTER. 0: DISABLED. 1:EFFECTIVE THE MOTORS FLUX FALLS AUTOMATICALLY WHEN THE OUTPUT
torque converter
TORQUE CONVERTER / INVERTER. use for control starting load when this function is used the start torque converter compensation is set by command mechanical friction load
electric inverter carrier frequency
CARRIER FREQUENCY set the upper limit and lower limit in K Hz units . the carrier frequency gain is set as follows . frequency
electric inverter afr gain and frequency
ELECTRIC INVERTER carrier frequency is 2 k Hz . 1:carrier frequency is the setting of c 6-0 1. 2: carrier frequency is 5 k Hz
electric inverter frequency
electric inverter frequency reference when the multi function inputs jog frequency reference selection f jog command and r jog command are on.the electric inverter
electric inverter torque reference
TORQUE REFERENCE DELAY TIME . the primary delay time constant of torque command filter is set in unit of m r s to adjust
frequency speed and voltage of inverter
set only to fine adjust v/f for the output range when using flux vector control of frequency speed and voltage of inverter .normally this setting